wire drawing

But the drawing of the complicated section special shaped wire must consider processing rate and speed.

对复杂断面的异型材，在拉拔时要考虑道次加工率和拉拔速度。

Handstand type wire drawing machine

倒立式滑落型伸线机

Ways to improve the quality of the annealed copper wires produced on the SNL 17D+ 57 kVA Medium Wire Drawing Machine

浅谈提高SNL17D+57kVA中拉机退火铜线质量的几种方法

The category and function of the copper wire drawing lubricant are presented.

本文介绍了铜拉丝润滑剂的种类、作用、对拉线的影响因素及质量要求.

Study on Tantalum Wire Drawing oil

钽金属拉拔润滑油的研制

The causes for the defects on annealed copper wires produced on medium wire drawing machines are investigated and the measures for improving equipment and process as well as circulating cooling system for annealing are presented accordingly.

本文分析了中拉机退火铜线产品质量缺陷产生的原因，并提出了相应的工艺、工装改进措施，对中拉机退火冷却循环系统进行改进。

This paper discusses some problems encunteredinthe production of wire drawing steel Q 195 Lat XinyuIronand Steel Co.

介绍新余钢铁有限责任公司在生产Q195L拉丝用钢中存在的主要问题.

An automatic control system of ARM-based wire drawing machine is introduced.

介绍了一种基于ARM的拉丝机自动控制系统.

The unqualified rate of thin steel wire for rope on torsion property is more than 30% after heat treatment and drawing.

小规格制绳钢丝经热处理、拉拔工艺后，出现30%以上的扭转性能不合格。

To introduce the process flow of Z-type steel wire production by die drawing way.

介绍整体模拉法生产Z型钢丝的工艺流程。

To introduce some experiences and methods for 1/ 1000 vertical take up applied to automatic take off of 1/ 850 single wire drawing machine The difficult problem of take off for heavy coil extra thick wire drawn by 1/ 850 single wire drawing machine is solved

介绍1／1000倒立式收线机应用于1／850单拉机自动下线的经验和方法，解决了1／850单拉机大规格大盘重拉拔卸线的难题

Continuous coiler is used to get the non-stop production in a wire drawing plant.

连续缠 卷装置 令拉丝工厂生产连贯.

We produce the annealed wire with high-quality low carbon raw materials through wire drawing, anneal process.

镀锌铁丝采用中低碳钢盘条为原材料, 按生产工艺可分为热镀铁丝和电镀铁丝.

Development and Application of the Wire Drawing Die of TZP Ceramics

TZP陶瓷拉丝模的开发与应用

Sales: screen; Nails; Wire drawing ; Metal products; Tech windows.

销售: 丝网; 铁钉; 拔丝; 五金制品; 塑钢门窗.

The wire drawing mold box is connected with the drawing mold case by a beaming roller and a bearing.

拉丝模具盒通过轴辊、轴承与拉丝模具箱相连接。

The phenomenon of wire diameter shrinkage is a common defect in continuous wire drawing.

“缩径”现象是钢丝在连续拉拔过程中常见的一种缺陷.

Metal wire drawing process, with slip design article!

金属拉丝工艺, 带防滑条设计!

Friction and wear behaviors of al_2o_3-based ceramic composite using as wire drawing dies

Al2O3基陶瓷拉丝模材料的摩擦磨损性能

It is also suitable for the light-duty wire and tube drawing and other general application.

还可使用在管和线的拉制及其他一般用途。

Process and equipment needed including aluminium ( alumnus alloy) continuous casting and rolling, aluminium continuous extrusion, continuous wire drawing, cold press weld and wire stranding;

对工艺技术与装备：铝（铝合金）连铸连轧、铝连续挤压、连续拉线、冷压焊和绞线；

For Wire drawing, mesh production, Packing and strapping, springs production, thin wire and steel ropes production.

因为电线图画, 网孔制造, 包装和皮绳或皮带的材料, 春天制造, 使电线变薄而且使粗绳制造坚如钢.

The machine draught of wire drawing machine is a key parameter of wire drawing machine design, it affect property of equipment directly.

拉丝机机器压缩率作为拉丝机设计的关键参数，直接影响到设备的性能指标。

To test hard alloy wire drawing die A whose price is RMB 20.2 yuan a piece and B whose price is 10 yuan a piece under same process equipment conditions. The wear and tear of the die per tone steel wire, wire broken times?

对价格为202元/块和10元/块的硬质合金拉丝模A和B在同样的工艺设备条件下进行试验。

Study on the application of the magnetic fluid seal in the wire drawing machine

磁流体密封在拉丝机中的应用研究

Compared to the normal wire drawing technology in room temperature, the cryogenic wire drawing technology showed remarkable effect: tensile strength was improved nearly 400 MPa, micro vickers hardness was enhanced 74 HV 4.9N, in the meanwhile, toughness was almost changeless.

研究表明，在相同的拉丝条件下，与常温工艺相比，深冷工艺能大幅度提高钢丝的综合力学性能。抗拉强度进一步提高近400MPa，显微硬度进一步提高74HV4.9N，而抗扭次数及伸长率基本不变。

The paper discusses the design throught and principle in detail from the angle of silicon aluminium minuteness wire drawing machine's desing and use, and carries through the drawing process and force analysis.

从硅铝丝微细线拉丝机的设计及使用角度，较详细地论述了该设备的设计思路和原理，并进行了拉丝过程和拉丝受力分析。

Electric Control System of Dance Wire Drawing Machine Drived by Slip ring Motor

用滑差电机驱动的活套式拉丝机电控系统

The Mathematics Pattern Creation and Computer Simulation System Research on the Cord Dry Wire Drawing Craft

钢帘线干拉工艺数学模型的建立及计算机模拟系统的研究

The utility model relates to a metal wire drawing winding drum.

本实用新型是一种用于拉制金属丝机械的卷筒。